IMU Sensors for Touch Designer Intro

We will introduce the TouchDesigner file in the workshop with some beginner ideas for using IMU signals to drive various operations in TouchDesigner.

Using IMU data to control a switch in TouchDesigner

Selecting an appropriate signal, mapping it into integers, and using these integers to drive a switch.

Rotating 3D objects in TouchDesigner with IMU Accelerometer Data

Using either TouchOSC or the SensorTile, this video shows how to extract a rotation signal and select and map it onto the appropriate transforms for a 3D object.

Using an IMU to drive colour parameters in TouchDesigner

Selecting an appropriate signal from the IMU and mapping it onto the hue offset in TouchDesigner.

Wiimote Plugin for Touchdesigner

A plugin for touchdesigner that supports the Wiimote and the Nunchuck based on Wiiuse.

Touchdesigner + Tobii Tutorial: How to freeze a video wherever you are looking at

This method is using Touchdesigner and the Tobii Eyetracker and freezing the video always in the viewers focus area. On the edge of the view the video always continues to play normally, but in the middle it freezes. Tobii Gaze Point: Gaze Point Input video from Luna Ikuta: https://www.instagram.com/lunaikuta/ My instagram account: https://www.instagram.com/hahnderhahn/

Hokuyo sensor – Touchdesigner Tutorial

Best interactive experience with hokuyo sensor hokuyo sensor(UST-10LX) http://www.akibadirect.com/shopdetail/000000013177/037/002/Y/page1/brandname/ setting up hokuyo for connecting to PC https://qiita.com/atsonic/items/be9e15f528e34e370d32 In detail https://miwa-maroon.medium.com/super-introduction-hands-on-interactive-content-with-hokuyo-sensors-and-touchdesigner-46e24f051a2 詳しい解説はこちら qiita:https://qiita.com/miwa_maroon/items/cfa59c1e4f8262add460 IG:https://www.instagram.com/p/CQGIsWHtjd-/ Twitter:https://twitter.com/miwata34

iPhone ARkit & Depth Sensor in TouchDesigner Tutorial – Part 2!

Get access to 70+ hours of TouchDesigner video training, a private Facebook group where Elburz and Matthew Ragan answer all your questions, and twice-monthly group coaching/mastermind calls here: https://bit.ly/2zJ0lmt Picking up where we left off in part 1, we dive deeper into Zig Sim Pro and look at the capabilities it has when it comes […]

Touchdesigner + Arduino + Bare conductive. Custom touchpad. Tutorial. (Сенсорная панель)

scheme: https://drive.google.com/file/d/1XGQL9FEaGpHLBOLgV5uh67ZoWrpWvGN0/view?usp=sharing I2C scanner: https://drive.google.com/file/d/1WG4c8xN8grgIECVvecH8ES59xo77bjtG/view?usp=sharing MPR121 library: https://github.com/BareConductive/mpr121 TD project: https://drive.google.com/file/d/1cQF39n3Ymz_ZpIxBUy6_P3nGX7etbvHZ/view?usp=sharing

TouchDesigner Week 11 Asynchronous Lesson

Arduino! – LDR (light sensor), Potentiometer (knob), Button (button), and TouchDesigner input

How to Quickly Calibrate Sensor Data in TouchDesigner (Tutorial)

Get access to more content like this – including 50+ hours of TouchDesigner video training, a private Facebook group where Elburz and Matthew Ragan answer all your questions, and twice-monthly group coaching/mastermind calls – here: https://bit.ly/2zJ0lmt Sensors output a lot of data. Kinects, Leap Motions, and touchscreens all output a wide range of data and […]

Motion sensing exercise with TouchDesigner 3

Detecting movement in TouchDesigner by comparing two images with the use of Cache and Cache Select.

Motion sensing exercise in TouchDesigner 1

This exercise explored the use of the MotionSense object in TouchDesigner to display two different pieces of text according to the motion detected in front of the webcam.

Motion sensing exercise with TouchDesigner 2

An exercise to demonstrate the idea of virtual touch using the MotionSense object in TouchDesigner.

TouchDesigner and Touch Board

How to use the Touch Board with TouchDesigner

Arduino and TouchDesigner

How to use the Arduino with TouchDesigner

TouchDesigner Tutorial – Denoising Sensor Data – Part 3

In this video we will look at various methods to smooth out sensor data. In the past, I have run into problems with noisy data coming from Arduinos and distance sensors and here are some solutions I have come up with to get consistent data. See the previous part here: https://youtu.be/0SaXOrZoJuk See the first part […]

TouchDesigner Tutorial – Denoising Sensor Data – Part 2

In this video we will look at various methods to smooth out sensor data. In the past, I have run into problems with noisy data coming from Arduinos and distance sensors and here are some solutions I have come up with to get consistent data. See the previous part here: https://youtu.be/mDaJYGTlxws

TouchDesigner Tutorial – Denoising Sensor Data – Part 1

In this video we will look at various methods to smooth out sensor data. In the past, I have run into problems with noisy data coming from Arduinos and distance sensors and here are some solutions I have come up with to get consistent data. See the next part here: https://youtu.be/0SaXOrZoJuk

TouchDesigner Demo – Video and Audio Devices as Sensors

Demonstration to convert real-time video and audio inputs into channel information to use as interactive sensors in TouchDesigner

TouchDesigner – Cell Phone Sensors & OSCin CHOP

Demonstration using OSChook app to bring Android phone sensor data (Rotation, Light, etc) into TouchDesigner wirelessly via the OSCin CHOP. Apps mentioned: OSChook: https://play.google.com/store/apps/details?id=com.hollyhook.oscHook&hl=en_US GyrOSC: https://apps.apple.com/us/app/gyrosc/id418751595

24th Motion Sensor Analysis[TouchDesigner](English)

It’s a tutorial for making a motion senser with Touchdesigner. You can use it to make a interface that reacts to human motion for example. Here I used CacheTOP and AnalyzeTOP to get the distribution of the motion. ※Caution: a TouchDesigner amateur user is making this movie, so there can be a lot of mistakes […]

Arduino Laser Trip Switch (laser emitter & Photo-resistor)

Some of our most popular programs are now available over on the website: https://www.programmingforpeople.com/shop WE’RE BACK. After what feels like too long, its time to get back on the horse. This time we come prepared with a box full of sensors and a new series to create! Episode 1 of Arduino Sensors – a laser […]